12-20-2002, 01:58 PM
someone needs to put on the tech articles page the setp by step instruction for these.
i myself would love to do this and have been wondering how to do it
i myself would love to do this and have been wondering how to do it
12-20-2002, 01:58 PM
12-20-2002, 03:07 PM
I concept, it is so simple that no detailed instructions are needed. BPV (recommended for metered air systems): One side to somewhere between turbo and TB (close to TB prefered), other side to turbo inlet after the VAM. Vac hose to vac tree. BOV: GOes somewhere between turbo and TB (close to TB prefered). Vac hose to vac tree.
There are so many different types / models / manufacturers of BPV, BOV out there, and so many different ways to set them up, depending on if you have no IC, a stock IC, a FMIC, if you want packaging efficiency or ultimate performance, etc, that it doesnt make much sense to write up a detailed set of "how to" instructions.
------------------
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)
There are so many different types / models / manufacturers of BPV, BOV out there, and so many different ways to set them up, depending on if you have no IC, a stock IC, a FMIC, if you want packaging efficiency or ultimate performance, etc, that it doesnt make much sense to write up a detailed set of "how to" instructions.
------------------
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 00 Windstar (wifes vehicle)