North American Turbocoupe Organization

I was surprised when pulling the lens off my passenger headlight last night in preparation for projectors and HIDs that the chrome is MINT (damn near perfect) in it. Rather than cutting up a mint headlight, I'd prefer to sell it to someone who is going to use stock bulbs or LEDs..

The lens is in really good shape too and clear. It could use a good cleaning and perhaps few passes with 1000 grit sandpaper. You'll need to reseal the lens.

$135 shipped, you pay the paypal fees.

I assume you don’t still have these lamps?

(12-29-2019, 09:19 PM)Harvey9095 Wrote: [ -> ]I assume you don’t still have these lamps?

I actually do, but the lens seen in the photos here was reused on a different housing that was reinstalled in my car after the HID kit was all assembled. I have another lens, but it'll need some good sanding and polishing as it has some swirls are scratches in it...

let me know if you're interested, I can probably knock a few bucks off if you're willing to sand, polish and seal up the lens/headlight on your own...

(12-30-2019, 09:23 PM)andrewjs18 Wrote: [ -> ]

(12-29-2019, 09:19 PM)Harvey9095 Wrote: [ -> ]I assume you don’t still have these lamps?

I actually do, but the lens seen in the photos here was reused on a different housing that was reinstalled in my car after the HID kit was all assembled.  I have another lens, but it'll need some good sanding and polishing as it has some swirls are scratches in it...

let me know if you're interested, I can probably knock a few bucks off if you're willing to sand, polish and seal up the lens/headlight on your own...

Hows the chrome on that 1? And how much?

(12-31-2019, 06:21 PM)Harvey9095 Wrote: [ -> ]

(12-30-2019, 09:23 PM)andrewjs18 Wrote: [ -> ]

(12-29-2019, 09:19 PM)Harvey9095 Wrote: [ -> ]I assume you don’t still have these lamps?

I actually do, but the lens seen in the photos here was reused on a different housing that was reinstalled in my car after the HID kit was all assembled.  I have another lens, but it'll need some good sanding and polishing as it has some swirls are scratches in it...

let me know if you're interested, I can probably knock a few bucks off if you're willing to sand, polish and seal up the lens/headlight on your own...

Hows the chrome on that 1? And how much?

the housing itself is the same one in the photos above. the only difference is that it's using a different lens and I fully cleaned out the channel where the lens attaches to the housing with butyl/silicone so the lens is ready to attach to the headlight immediately...

if you're in Philadelphia and want to come look at it and pick it up, I'd knock off the shipping costs which would be about $15...I'm in Delaware County.

thanks to , this is now sold!