North American Turbocoupe Organization

These are NAPA's preformed 90* heater hoses.
These two styles will replace ever heater hose on the car except the thinner formed hose that goes to the lower intake. These are cut to lenght.

NAPA part #s 9807 and 7296.
NAPA part #s 9807 and 7296.
7296 measures approx. 2 1/2" X 3 3/4"
9807 measures approx. 4 1/2" X 6 1/2"

U-Shaped cooling hose/intake
I picked up this u-shaped cooling hose from NAPA,
Part # 10304.

I don't remember how many of which you need.

Most of this info was provided by Robert Camp

Also the radiator hoses:
Main radiator coolant hoses
NAPA upper – 8048
NAPA lower - 8009

7296 measures approx. 2 1/2" X 3 3/4"
9807 measures approx. 4 1/2" X 6 1/2"

------------------
Eric J
Proud NATO member
88 TC 5spd
01 F250 SD powerstroke(turbo deezill)
05 Buick Terazza(wife's)
'Keep yer touque on,Eh!'

Regular heater hose works for the line that goes to the lower intake. Just elongate it instead of bending it like the stock line.

------------------
Ryan Harris

88 TC, 5 speed, B&M Ripper Shifter, Walbro 190 LPH, K&N, 3.73's, 88K miles
Awaiting install: Volvo FMIC, Walbro 255 HP, Kirban Adj. FPR

ok thanks thats what I was wondering. off to napa tomorrow

What size is the lower heater hose? 1/2"? 3/8"?

Note, I believe the U shaped hose to the lower intake is no longer available. Use suitable size heater hose to make your own.