so my car wont stay running after i put the bov on but if i disconect vacume line goin to it,. it dont stall after i rev it or shift
you need to shim, or get a stiffer spring in your BOV. i had the same problem with mine, vacum is holding it open at idle. put some tape over the BOV outlet and try to start it, if it idles fine like this it will confirm thats the problem.
do i take it apart and put a stiffer spring in or what?
not sure on the greddy, but on mine i had to open it up and shim the spring until it was stiff enough to stay closed at idle. took a little time to get it tuned just right but it works great now
ill have to look at it and see what i can do