02-17-2004, 02:57 AM
Todays agenda was to clean the EGR valve. So i took it off, faq say 2 bolts only, but theres a large metal hose attacked to the side as well and a gasket. So i cleaned it out but I think I got the diaphragm wet, dried it out best I could and put it back on. Took it for a ride but for some reason no boost. Hear the K&N drawing but also a high pitch hiss like a air leak. The old gasket on the EGR was toast so I didnt reinstall it, have to go buy a new one. Also couldnt find a tool to remove that small washer in between the egr and the metal piece holding it on, got it loose but now it just turns but wont unscrew.