North American Turbocoupe Organization

Where can I get the red waterline hoses that connect the turbo waterlines on a 88 TC ? The two that are about 1/4" and 4" long. Can't seam to find any around here.

I think I found my hose by searching on here.

They are discontinues from Ford. You can try Napa to see if they have any Hi-Temp water hoses.

NAPA carries some hi temp hose. But I don't know if they carry it in that small a diameter for the supply side on an IHI

Mike has them.
http://natomessageboard.com/cgi-bin/ulti...2;t=000022

my measurement is 5/16? nobody listed what size they used?

5/16" sounds about right. I bought a few feet of high temp Silicone hose from Ebay almost 20 years / 100+K miles ago. Been working fine ever since.

Jeff K Wrote:5/16" sounds about right. I bought a few feet of high temp Silicone hose from Ebay almost 20 years / 100+K miles ago. Been working fine ever since.

thank you jeff

(01-30-2006, 10:53 PM)Ricky03 Wrote: [ -> ]Where can I get the red waterline hoses  that connect the turbo waterlines on a 88 TC ? The two that are about 1/4" and 4" long. Can't seam to find any around here.

hps-siliconehoses except these are either black or blue

http://www.hps-siliconehoses.com/hps-8mm-silicone-tube-tubing-coupler-3-feet-coolant-tube-hose-4-ply-blue.html