North American Turbocoupe Organization

Full Version: enertia switch? how to disconnect it?
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
how do you disconnect the enertia switch? do you just try to unplug it or do ihave to unbolt it from the car?
ahhh where is the damn enteria switch! i cant find it!!!!!
What year car? If it is an 87-88, it is located at the rear, attached to the bulkhead the tail lights are mounted to. You have to remove the trunk liner panel to see it. You can unbolt it from under the car. If the car is 83-86, it is above the pas side wheel well in the trunk.

------------------
Jeff Korn

88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 20 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)
If it's tripped then push it in.To bypass it just jumper it so it makes a complete connection.
thanks, found it, replaced the fuel filter, all is well again... except for the trans, read my other post