I got 22 on my abs code. Read on Alldata program of a friends to measure resistance between pins 6 & 7 on 7 pin connector on solenoid valve. It said to get between 5 and 8 ohms of resistance. I have 6.2 ohms. It says to now "Replace or service cable harness ( Circuit 495 or 685). Where and what in the heck is that at?
Thanks James
------------------
88: Densecharger cold air kit w/ K&N, polished upper from Dan E, Gillis Boost valve,4 point roll cage w/ Corbeau seats and G Force 5 point seat belts harness.
Black Exterior W/ Raven Interior 189,000 Miles
Check your e-mail. If that doesn't work, you may need to get some manuals, The EVTM and Electrical Diagrams
Quote:Originally posted by Pete D:
Check your e-mail. If that doesn't work, you may need to get some manuals, The EVTM and Electrical Diagrams
Is that the same diagram you emailed me before?
------------------
88: Densecharger cold air kit w/ K&N, polished upper from Dan E, Gillis Boost valve,4 point roll cage w/ Corbeau seats.
Black Exterior W/ Raven Interior 189,000 Miles
Drop the pass side rear panel in the trunk to access the ABS computer. Remove the connegtor from the ABS comp. and check the resistance for that valve at the connector. The ABS comp should have a sticker on it showing the pinouts with circuit numbers.
------------------
Jeff Korn
88 Turbo Coupe: Intake and exhaust mods, T3 turbo at 21 psi, forced air intercooler, water injection, bypass valve, Ranger roller cam, subframes, etc., etc.. // 86 Tbird 5.0 (original owner): intake, exhaust, valvetrain mods, 100 HP nitrous, ignition, gears, suspension, etc., etc.... // 91 Escort: Bone stock winter car // 02 Taurus Vulcan(wifes car)